Login

cara menggabungkan 2 isp ke 1 mikrotik

Admin NKBT • - • 29 Jan 2026 02:59
80 Kata-Kata Lucu Bikin Kesal, Cocok untuk Status WhatsApp

cara menggabungkan 2 isp ke 1 mikrotik

  

        Load Balance menggunakan Metode PCC. Load balance pada mikrotik adalah teknik untuk mendistribusikan beban trafik pada dua atau lebih jalur koneksi secara seimbang, agar trafik dapat berjalan optimal, memaksimalkan throughput, memperkecil waktu tanggap dan menghindari overload pada salah satu jalur koneksi.


langsung saja contohnya seperty berikut:

1.


2.

3.

4. 


5.

dan bagi kalian yang penasaran langsung saja kalia copy scriptnya:


/ip address

add address=30.30.30.1/24 network=30.30.30.0 broadcast=255.255.255.0 interface=ether3

add address=192.168.1.64/24 network=192.168.1.0 broadcast=255.255.255.0 interface=nkbt.net1

add address=192.168.2.12/24 network=192.168.2.0 broadcast=255.255.255.0 interface=nkbt.net2


/ip dns set allow-remote-requests=yes cache-max-ttl=1w cache-size=5000KiB max-udp-packet-size=512 servers=8.8.8.8


/ip firewall mangle

add chain=input in-interface=nkbt.net1 action=mark-connection new-connection-mark=nkbt.net1_conn

add chain=input in-interface=nkbt.net2 action=mark-connection new-connection-mark=nkbt.net2_conn


add chain=output connection-mark=nkbt.net1_conn action=mark-routing new-routing-mark=to_nkbt.net1

add chain=output connection-mark=nkbt.net2_conn action=mark-routing new-routing-mark=to_nkbt.net2


add chain=prerouting dst-address=192.168.1.0/24 action=accept in-interface=nkbt.nlan4

add chain=prerouting dst-address=192.168.2.0/24 action=accept in-interface=nkbt.nlan4


add chain=prerouting dst-address-type=!local in-interface=nkbt.nlan4 per-connection-classifier=both-addresses-and-ports:2/0 action=mark-connection new-connection-mark=nkbt.net1_conn passthrough=yes

add chain=prerouting dst-address-type=!local in-interface=nkbt.nlan4 per-connection-classifier=both-addresses-and-ports:2/1 action=mark-connection new-connection-mark=nkbt.net2_conn passthrough=yes


add chain=prerouting connection-mark=nkbt.net1_conn in-interface=nkbt.nlan4 action=mark-routing new-routing-mark=to_nkbt.net1

add chain=prerouting connection-mark=nkbt.net2_conn in-interface=nkbt.nlan4 action=mark-routing new-routing-mark=to_nkbt.net2


/ip route

add dst-address=0.0.0.0/0 gateway=192.168.1.1 routing-mark=to_nkbt.net1 check-gateway=ping

add dst-address=0.0.0.0/0 gateway=192.168.2.1 routing-mark=to_nkbt.net2 check-gateway=ping


add dst-address=0.0.0.0/0 gateway=192.168.1.1 distance=1 check-gateway=ping

add dst-address=0.0.0.0/0 gateway=192.168.2.1 distance=2 check-gateway=ping


/ip firewall nat

add chain=srcnat out-interface=nkbt.net1 action=masquerade

add chain=srcnat out-interface=nkbt.net2 action=masquerade



untuk kalian yang bingung naruh scriptnya kalian paste kan ke terminal mikrotik dan kasih tanda / di scrpt seperti gambar berikut:


ok begitu saja tutorial saya smoga bermanfaat...




Komentar

Login untuk berkomentar